注：本产品规格多样，更多规格请联系在线客服，或电话咨询：
用途：用于电力通信行业管道电缆（光缆）敷设施工。
Uses : suitable for tube optical cable installation in power communication industry .
组成：玻璃钢穿孔器由穿孔条和小车组成，穿孔条两头各有M12螺纹连接的尼龙导向头和牵引环，穿孔条的标准长度为100m。
component :fiberglass duct rodder is composed of rodder and small wheel .There are nylon guide tip and nylon shackle for fiberglass duct rodder with terminal end threaded 12mm . the standard length of roller guide tip is 100m.
特点：穿孔条采用FRP拉挤成型芯材，外覆特种工程塑料，具有光滑、强度高、耐候性好的特点。
feature :rodder adopt FRP molding core material . the external cover with special engineering plastics. Smooth and high-strength .
CSP1玻璃钢穿孔器采用φ11mm的穿孔条。
Model CSP1 fiberglass duct rodder adopt Φ11mm roller guide tip, CSP2玻璃钢穿孔器采用φ13mm的穿孔条。
Model CSP1 fiberglass duct rodder adopt Φ13mm roller guide tip,
CSP3玻璃钢穿孔器采用φ15mm的穿孔条。
Model CSP1 fiberglass duct rodder adopt Φ15mm roller guide tip,
说明：如需其他长度，应在合同中注明。
Note :please note in contract if need other length .下表附件可供玻璃钢穿孔器配套选用：
The following attachment supplied accessories for duct rodder ：
序号 No | 名称规格Spec | 结构特征Feature | 用 途Use |
1 | ZT25锥形导向头 ZT25Cone-shaped guide tip | 锥形头部Cone-shaped tip φ25 | 引导穿孔条通过管道,ZT25头部有孔，
可用于牵引绳的回牵连接 Guide rodder through duct ,the tip of model Z25 with hole , apply to pullback connect pulling rope . |
2 | ZT40锥形导向头 ZT40Cone-shaped guide tip | 锥形头部Cone-shaped tip Φ40 |
3 | DXL60导向滚轮 DXL60 guide roller | 外接圆CircumcircleΦ60 | 引导穿孔条通过转弯和管子未对齐处, Guide rodder through swerve and level end of duct . |
4 | NC100泥渣铲斗 NC mud basket | 封闭活门Close valveΦ60 | 清除管道内遗留的泥渣或其他小物件 To clean mud and other small thing |
5 | XZM12N旋转连接头 XZM12N swivel joint | 外径Out diameter Φ25 | 用于穿孔条的接 Connect the rodder |
