使用后更换瓶盖。手用干布或无水洗手液清洗干净。清洁工具，用不易燃的清洗液。DIRECTIONS
1.For best results,clean and dry all surfaces with a residue-free solvent,such as YURI pats Cleaner.
2. Cut nozzle to desired bead size-gasket are best formed using a 1/16 to 1/4 bead.
3. Apply a continuous and even bead of silicone to one surface ,surround all bolt holes. Remove excess with knife at once. Assemble parts immediately. Do not squeeze out silicone by overtightening bolts. Re-torque not will be necessary。
4. Silicone dries in 1 hour,and fully cures in 24 hour. Measured at 70℉（21℃）-50% relative humidity.
5. Replace cap after use .Clean hands with dry cloth or waterless hand cleaner. Clean tools with non-flammable cleaning fluid.
注意：不建议使用的零部件与汽油接触
NOTE:Not recommended for use on parts in contact with gasoline
USES:Gearbox，axles, engine valve covers,oil pans,timing covers,water pumps,thermostat housings,sealing electrical boxes
用途：变速器，车桥，发动机，阀盖，油底壳，定时盖，水泵，自动调温器外壳，封口电线盒。