4. 特点
流线型设计,体积小巧, USB2.0接口,免电源,与台式示波器类似界面,易于上手.
更适合于笔记本电脑，生产线维修调整，便于出差使用。
小的尺寸(mm):190(L)x100(W)x35(H) ,便于携带.
.高刷新率,高采样率,100MS/s实时采样.
软件支持: Windows98,Windows Me, Windows NT, Windows 2000, Windows XP ,VISTA
20余种自动测量功能, PASS/FAIL Check功能,适于工程应用.
波形平均,余辉,亮度调节,反向,加,减,乘,除,X-Y显示
波形数据可以按时间和电压输出到EXCEL,BMP,JPG。
FFT频谱分析
一台电脑可同时连多台示波器,轻松扩展通道数.
二次开发库提供,Labview\\VB\\VC\\Delphi\\C++Builder开发示例提供
5. 技术指标
通道 | 2通道 |
带宽 | 40MHz |
单次带宽 | DC to 40MHz |
最大实时取样率 | 100MS/s |
存储深度 | 10K-32KB/CH |
垂直分辨率 | 8Bit |
阻抗 | 1MΩ 25pF |
耦合 | AC/DC/GND |
电压量程 | 10mV-5V, 9Steps |
垂直精度 | ±3% |
时基量程 | 4ns-1h, 38 Steps |
垂直位置可调 | 有 |
输入保护 | Diode嵌位 |
X-Y | 有 |
自动设置 | 有(30Hz to 40MHz) |
外触发输入 | 有 |
水平方式 | 自动,标准,单次 |
触发斜率 | +/- |
触发电平可调 | 有 |
触发类型 | 模拟 |
触发源 | CH1, CH2, EXT |
预触发 | 0-100%选择 |
取样率选择 | 有 |
辉线显示 | 点/线,波形平均,余辉,亮度调节. |
网络 | 开/关 |
垂直模式 | CH1, CH2, Dual, ADD |
光标测量 | 有 |
算法 | 快速富氏变换,反向,加,减,乘,除. |
光标显示 | 频率,电压 |
数据点 | 10K-32K每通道 |
配套 | S/W CD, probes, manual, USB cord |
6．应用程序：
软件支持: Windows98,Windows Me, Windows NT, Windows 2000, Windows XP ,
VISTA
7．二次开发：
提供常用开发平台下的DEMO源代码(VC、CVI、VB、LABVIEW)和开发
技术支持。
English:
(Contact: QQ: 794 321 314, Tel: , E-mail: liupei-han@hotmail.com)
【Software V7.0.0.3】
【32 Driver】
【64 Driver】
【Manual】
【SDK
4. Characteristic
- USB2.0interface,no external power source required,easy to use.
- be suitable for notebook computer，product line maintenance，be used easily on business.
- Dimensions (mm):190(L) x100(W) x35(H),be carried easily.
- High performance, 100MS/s real-time sampling, 40MHz Bandwidth.
- Operating System: Windows98,Windows Me, Windows NT, Windows 2000, Windows XP ,VISTA
- 23 measurement functions, PASS/FAIL Check,be suitable for technical application.
- Waveform average, persistence,intensity,invert,addition, subtraction, multiplication, division,X-Yplot.
- Save waveform in the following: text file, jpg/bmp graphic file, MS excel/word file.
- FFT
- One computer can connect many DSO, extend channel easily.
- Labview\\VB\\VC\\Delphi\\C++BuilderSecond Design instance.
5. Hardware Specification
Channel | 2Channels |
Bandwidth | 40MHz |
Shot bandwidth | DC to 40MHz |
Impedance | 1MΩ 25pF |
Max. Sample rate | 100MS/s |
Coupling | AC/DC/GND |
Vertical resolution | 8Bit |
Gain range | 10mV-5V, 9Steps |
DC accuracy | ±3% |
Timebase range | 4ns-1h, 38 Steps |
Vertical adjustable | Yes |
Input protection | Diodeclamping |
X-Y | Yes |
Autoset | Yes(30Hz to 40MHz) |
EXT. input | Yes |
Trigger Mode | Auto, Normal and Single |
Trigger Slope | +/- |
Trigger level adjustable | Yes |
Trigger Type | Rising edge, falling edge |
Trigger Source | CH1, CH2, EXT |
Pre/Post trigger | 0-100% |
Buffer size | 10K-32KB/Channel |
Sampling selection | Yes |
Waveform Display | port/line,waveform average, persistence, intensity |
Network | Open/Close |
Vertical mode | CH1, CH2, Dual, ADD |
Cursor measurement | Yes |
Math | FFT, addition, subtraction, multiplication, division. |
Cursor | Frequency, Voltage |
Data Samples | 10K-32K/Channel |
Accessories | S/W CD, probes, manual, USB cord |
6．Software：
Operating system: Windows Me, Windows NT, Windows 2000,
Windows XP, VISTA.
7．SecondDesign：
Supply DEMO code(VC、CVI、VB、LABVIEW) and technical support.