CMP1-5T CMP1-10T
额定量程 2.452 kN {250 kgf}～196.1 kN {20 tf}
安全过载 150 %R.C.
极限过载 200 %R.C.
额定输出 2 mV/V±0.005 mV/V (CMP1-250K：1 mV/V±0.005 mV/V)
非线性 0.05 %R.O.
滞后性 0.05 %R.O.
重复性 0.05 %R.O.
推荐激励电压 12 V 以下
最大激励电压 18 V
零点平衡 ±0.02 mV/V
输入电阻 350 Ω±3.5 Ω
输出电阻 350 Ω±5 Ω
绝缘电阻 2 000 MΩ 以上(DC50 V)(电桥与主体之间)
补偿温度范围 －10 ℃～70 ℃
安全温度范围 －20 ℃～80 ℃
温度变化对零点的影响 0.05 %R.O./10 ℃ (CMP1-250K：0.10 %R.O./10 ℃)
温度变化对输出的影响 0.10 %LOAD/10 ℃
电缆 φ7、带4芯屏蔽线、10 m直接连接、带前端Y型压接端子
防护等级 IP68
弹性体的材质 不锈钢
寿命 额定量程时1 000 000次
CMP1-5T CMP1-10T
供应日本NTS传感器
AST46SW防爆压力开关
The Model 46SW is a high accuracy Explosion-proof Pressure Switch, designed for use in a variety of applications. Applying digital compensation, this product offers top performance over a wide temperature range. Utilizing Krystal Bond Technology?, the sensing element will measure pressure in the most extreme temperature conditions. Where other sensor technologies will freeze or boil, the AST46SW uses a one piece stainless steel sensor to offer continuous operation. If linearity and repeatability are critical for your application, this product will exceed your expectations at an affordable price.
Design Benefits - CSA30 (UL1203 / FM3615) Class I Div 1 and Zone 1 Group IIC Explosion-proof - Groups A, B, C, D
- ATEX / IECEx: Class I, Zone 1, Ex d IIC T5 Gb (Ta = -40°C to 85°C)
- ANSI 12.27.08-1 Single Seal Approved
- ASIC Compensation
- Superb Temperature Performance
- Excellent Accuracy
- High Proof and Burst Pressure
- Factory Sealed
Applications / Industries Well Optimization
- Oil and Gas Pipelines
- Drilling Platforms
- Compression Panels
- CNG / Hydrogen Fill Stations
- Paint Booths
- RTU
- Combustion Controls
AST5100差压变送器
The AST5100 Differential Pressure Transmitter is your accurate pressure sensing device for low differential pressure. With a differential pressure ranges as low as 0 to 5" water column (12.5mbar), this product can be used to measure flow across an orifice, differential across a filter, tank level, or gauge pressure. Using LVDT technology and AST"s advanced electronics, the AST5100 delivers accurate, repeatable measurements.
Design Benefits - Accurate Low Pressure Measurement
- Excellent Repeatability
- Wide Variety of Liquids and Gases including:
Water, Natural Gas, Hydrocarbon Fuels, Air, Non-Corrosive Gases
Applications / Industries Liquid Level Control including Bubbler systems
- Climate / HVAC Controls
- Energy Management
- Air-fuel Ratio including Measurement for Furnaces
- Vapor Recovery
- Leak Detection
- Air or liquid Filtration
- Flow Measurement
- External Tank Level
CMP1-5T CMP1-10T