CBE1-50K CBE1-100K
型 号 额 定 量 程 固有频率
(Hz) 额定位移量
(参考值) 重量 (约kg)
CBE1-5K 49.03 N {5 kgf} 250 0.19 0.73
CBE1-10K 98.07 N {10 kgf} 384 0.21
CBE1-20K 196.1 N {20 kgf} 420 0.21 0.76
CBE1-50K 490.3 N {50 kgf} 555 0.25
CBE1-100K 980.7 N {100 kgf} 1 250 0.23
CBE1-200K 1.961 kN {200 kgf} 1 428 0.32
额定量程 49.03 N {5 kgf}～1.961 kN {200 kgf}
安全过载 150 %R.C.
极限过载 200 %R.C.
额定输出 2 mV/V±0.003 mV/V
非线性 0.05 %R.O.
滞后性 0.05 %R.O.
重复性 0.03 %R.O.
推荐激励电压 12 V 以下
最大激励电压 20 V
零点平衡 ±0.02 mV/V
输入电阻 350 Ω ～ 450 Ω
输出电阻 345 Ω ～ 355 Ω
绝缘电阻 2 000 MΩ 以上(DC50 V)（电桥～主体之间）
补偿温度范围 －10 ℃～60 ℃
安全温度范围 －20 ℃～80 ℃
温度变化对零点的影响 0.03 %R.O./10 ℃
温度变化对输出的影响 0.03 %LOAD/10 ℃
电缆 φ6.3、带4芯屏蔽线5 m直接连接、带前端Y型压接端子
防护等级 IP67
弹性体的材质 不锈钢
重量 CBE1-5K～10K：约0.73kg；CBE1-20K～200K：约0.76kg
寿命 额定量程时1 000 000次
CBE1-50K CBE1-100K
AST4400本质安全压力传感器/变送器
The AST4400 is an intrinsically safe pressure transmitter with a wide variety of options. With its rugged construction and the best price-to-performance ratio in the industry, the AST4400 is the solution for pressure measurement in Intrinsically Safe (IS) areas. It utilizes AST"s proprietary Krystal Bond? Technology, a one-piece sensing element that offers excellent long-term stability and repeatable results.
Design Benefits - Krystal Bond? Technology
- Class I Div 1 Groups C, D Intrinsically Safe when installed with approved barrier
- ATEX / IECEx: Class I Zone 0 Exia IIB T4 Ga (Ta = -40°C to +80°C)
- CE EN61326
- ABS Type Approved
- Sil2 available with 4-20mA
- ABS (American Bureau of Shipping) Type Approval
- High strength stainless steel, Inconel or Hastelloy C276 sensor
- No oil, welds or internal o-rings
- Pressures to 20,000 PSI
- Unparalleled Price and Performance
- Compatible with wide range of liquids and gases
- EMI/RFI Protection
Applications / Industries Industrial OEM Equipment
- HVAC/R Equipment
- Water Management
- Intrinsically Safe Control Panels
- Pneumatics
- Hydraulic Systems
- Data Loggers
- See also: HLR750- Intrinsically Safe Position Sensor
AST4401本质安全压力变送器
The AST4401 is similar to the AST4400 intrinsically safe pressure transducer, but offers the additional approval for Groups A and B. The maximum supply voltage allowable is 15.5V DC.
Design Benefits - Class I Division 1 Groups A, B, C, D Intrinsically Safe when installed with approved barrier (UL / CSA)
- ATEX / IECEx: Class I Zone 0 Exia IIC T4 Ga (Ta = -40°C to +80°C)
- Leading sensor technology available in 316L stainless steel, Hastelloy C276 or Inconel 718
- 4-20mA or voltage outputs
Applications / Industries Factory automation systems
- Paint booths and sprayers
- Chemical processing plants
- Purfume processing facilities
AST44LP本质安全低压压力变送器
The AST44LP is a low pressure Class I Division 1 intrinsically safe pressure transmitter / pressure transducer Groups C, D when installed with an approved barrier. In addition, AST44LP can be configured with approvals such as ATEX/IECEx Exia and SIL2 ratings.
With its rugged construction and the best price-to-performance ratio in the industry, the AST44LP is the solution for low pressure measurement of liquids and gases for a variety of applications. Order analog voltage for designs requiring low current consumption or fast response time or 4-20mA output signals for long distance transmissions.
The diaphragm is available with 316L stainless steel as the standard sensor material and can be designed using Hastelloy C276 for more corrosive liquids or gases.
Design Benefits - Class I Division 1 Groups C,D when installed with an approved barrier
- ATEX / IECEx: Class I Zone 0 Exia IIB T4 Ga (Ta = -40°C to +80°C)
- ABS (American Bureau of Shipping) Approved
- High Strength Stainless Steel or Hastelloy C276 Construction
- From 0-1 to 0-15 PSI
- Starting under $250 with quantity discounts
- Wide Variety of Liquids and Gases
Applications / Industries Industrial OEM equipment
- Compressor control panels
- Pneumatic systems
- Vapor recovery units - VRU (bi-directional pressure available)
- Externally Mounted Tank Level Measurement for liquids and chemicals
CBE1-50K CBE1-100K