产品介绍：
?该锯适用于危险的工作环境，可在较高温的环境下作业，无火花，在潮湿的环境中无漏电危险，是一款性能可靠、安全型及效率极高的理想风动工具之一。广泛用于采矿、石化、建筑等行业。
?利用井下压风管道系统作为动力源。重量轻，易携带；结构科学，便于作业。
?可快速切割管道、电缆、角钢、结构钢、U型钢、链条、锚杆、锚索等。
?锢金属钢合金超级锯条，耐高温、耐摩擦、使用寿命长。非常适用于锯割不锈钢、镍基合金、铁、铜、铝、玻璃、塑料、木材等。技术参数：
|
型号
|
功率
|
耗气量
|
|
切割宽度（直径）
|
锯片速度
|
重量
|
|
WZJ-120
|
0.5kw
|
0.6
|
|
120mm
|
60m/min
|
6kg
|
使用方法：
1、了解所需切割的材料，如有必要可以通过降低空气压力来降低锯片的转动速度。
2、确保牢固固定了所需切割的材料，防止其移动。
3、气动空气马达时，用手指按压阀杆，然后开始切割。
4、用锯的重量来控制切割压力。对于较软的材料来说，这样的重量已经足够。过多的压力会降低锯片的速度。对于较硬的材料，可以通过加压的方式来降低锯片的转动速度。切割是保持锯笔直。锯片的任何扭曲或歪斜都可能降低其使用寿命。（注意：避开切割后可能掉落的碎片。切割即将完成时，切勿使锯碰到您的身体、工件或附近的其它人员。）
5、关闭空气马达时，释放阀杆。
6、下次切割开始前，锯片必须保持运动状态。气动锯时，锯片不能接触任何表面。
7、断开空气软管时，关闭空气软管阀。断开前，先打开空气阀给软管减压。
8、更换锯片前，务必断开空气软管，并推动阀杆以释放掉马达内的压力。
9、顺时针转动调整手柄以便释放锯片导杆上的张力。然后释放侧面板的锁以便打开侧面板。然后从驱动轮上取下锯片并将其从锯带导杆上松开。
联系人金经理电话
河南平顶山市煤矿井下气动切割锯气动煤矿防爆U型钢切割锯宁夏煤矿井下锚索切割机矿用煤炭切割机钢管U型钢切割锯辽宁抚顺市煤矿井下气动切割锯矿用煤炭切割机钢管U型钢切割锯江苏南京矿用工字钢切割锯钢管角钢切割锯山西长治市气动铝合金钢材切割锯矿用风动钢管U型钢切割气动风动切割锯四川成都煤矿井下气动切割锯气动带锯手持式无火花切割锯河南煤矿井下气动切割锯手持式无火花切割锯河南气动切割锯配件H钢工字钢快速切割锯方管切割锯内蒙古东胜市气动铝合金钢材切割锯手提式气动工字钢无火花矿用切割锯河南煤矿井下锚索切割机U型钢工字钢风动切割锯新疆哈密市矿用工字钢切割锯FDJ-220进口风动切割锯工字钢切割气动锯贵州贵阳矿用U型钢切割锯小型轻轨切割锯江西无火花切割锯厂家矿用锚索锚杆气动带锯内蒙陕西气动切割锯配件矿用气动切割锯切铁锯参数山西周边煤矿井下气动切割锯手持式无火花切割锯新疆乌鲁木齐气动切割锯配件矿用锚杆锚索切割锯福建宁夏气动铝合金钢材切割锯手提式气动切割锯矿用大功率工字钢切割锯山东济南无火花切割锯厂家FDJ-120工字钢气动风动无火花切割锯供应河南平顶山市无火花切割锯厂家高瓦斯防爆切割锯黑龙江七台河气动铝合金钢材切割锯阳泉矿用气动切割锯厂家U型钢切割锯吉林辽源市煤矿井下切割锯锯条太原切割锯生产手持式无火花矿用切割锯新疆矿用工字钢切割锯FDJ-120矿用大功率工字钢切割锯四川眉山矿用U型钢切割锯新型石油管道切割锯
联系人金经理电话
Cutting materials and applicable scope: (hand held explosion-proof cutting saw is mainly used for cutting coal mines, high gassy mines, oil pipelines, natural gas pipelines, cables and so on, which requires no sparks in the cutting process).
Iron, steel, copper, iron, copper, cable, anchor, steel mesh, I-beam, channel steel, U steel, H steel, steel, steel, steel, coal miners C steel rail.
FDJ-120 type mine emulsion pipe cutting saw, cable emulsion non spark cutting saw, the emulsion of -120 type coal mine angle cutting saw, mine explosion-proof structure steel cutting saw, FDJ-120 type tunnel U type steel cutting saw, I-beam without spark cutting machine, FDJ-120 type track cutting cutting saw, chain saw, cutting off the coal mine FDJ-120 type mine anchor cable cutting saw, pneumatic hand-held cutting saw no spark...
FDJ-120/180/230 hand-held emulsion / wind cutting saw use method:
1, understand the material needed to cut, if necessary to reduce the speed of rotation of the saw blade by reducing the pressure of the air.
2, ensure that the required cutting material is firmly fixed to prevent its movement.
3. When the emulsion motor is motor, the stem is pressed with the finger and then the cutting is started.
4, use the weight of the saw to control the cutting pressure. This weight is enough for softer materials. Too much pressure can reduce the speed of the saw blade. For harder materials, the speed of rotation of the saw blade can be reduced by pressure. The cutting is to keep the saws straight. Any twist or skew of the sawblade may reduce its service life. (notice: avoid debris that may fall after cutting. When the cutting is about to be finished, do not make the saw touch your body, the workpiece, or the other people in the vicinity.
5. When the air motor is closed, the stem is released.
6. The saw blade must remain moving before the next cutting begins. The saw blade can't contact any surface when a pneumatic saw.
7. When the air hose is disconnected, the air hose valve is closed. Before disconnecting, open the air valve and decompress the hose.
8. Before replacing the saw, be sure to disconnect the air hose and push the stem to release the pressure of Madane.
9, adjust the handle clockwise to release the tension on the sawing guide rod. Then release the lock of the side panel so as to open the side panel. Then remove the blade from the drive wheel and release it from the sawing guide rod.
Shanxi million Zejin Machinery Equipment Manufacturing Co., in 2002 began to engage in the specific work of mining engineering, then according to their own demand, starting their own R & D and production of series of mining machinery needs, and transformation into today, customers all over the country, machinery manufacturing industry leader. It is a factory specializing in mining equipment, the company produces the mine / emulsion pneumatic cutting saw technology mature, the quality is excellent.